|
|
![]() NOTE
(2) The test stand must include means for
Certain pressures vary over a wide range
driving the transmission, instruments and controls
because they are influenced by several
for measuring and regulating the input torque and
factors; speed, range in operation, lockup
speed, an oil cooler which can be connected to the
or converter operation, and position of
transmission, and linkage to control the manual
transmission throttle lever influence
selector and throttle lever shafts.
pressures. All pressures are based on
(3) A suitable method of locking the trans-
normal (180 to 200 F.) transmission
mission output shaft must be provided.
operating temperature.
c. Transmission Test Data Log Sheet. A simple
transmission test log sheet for recording per-
5-62. Tests
formance data is illustrated in figure 5-141.
a. Warmup.
Use the oil pressures listed in table 5-1 as normal
values in testing the transmission.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |