Section IV. OVERHAUL (REBUILD) OF FRONT OIL PUMP AND DIAPHRAGM ASSEMBLY

Section IV. OVERHAUL (REBUILD) OF FRONT OIL PUMP

A N D DIAPHRAGM ASSEMBLY

5-12. Description

32 (fig. 5-27 through 5-32). No further

disassembly of those parts is required.

Refer to paragraph 2-6 for description of front oil

a. Diaphragm Assembly (fig. 5-62).

pump components and diaphragm assembly.

(1) Remove two hook-type seal rings (fig. 5-

5-13. Disassembly

63) from flange, and remove thrust washer,

NOTE

(2) Using a 1/2inch wrench, remove four oil

All related items not covered in a and b

pump bolts, leaving two bolts diametrically op-

below were removed from transmission as

posite each other. Loosen these two remaining

outlined in paragraph 5-6, steps 27 through

bolts, enough so that by tapping on them, oil pump