Idler Shaft Rear Bearing Cover.

TM 9-2520-246-34

rear bearing cover capscrews to 60-77 lb-ft

torque. Refer to section VII of this chapter

for bearing adjustment procedures.

Remove the four capscrews and lockwashers

securing the idler shaft rear bearing cover to the

transfer case. (See fig. 4-35.) Remove the cover and

rear bearing shims.

o. Input Shaft Rear Bearing Cover.

NOTE

During assembly, use a new gasket. Tighten

capscrews to 60-77 lb-ft torque.

Figure 4-34. Removal of Transfer Top Cover

NOTE

and Shifter Shaft.

Remove the six capscrews and lockwashers

n. Idler Shaft Rear Bearing Cover.

securing the input shaft rear bearing cover

to the transfer case. (See fig. 4-35.) Remove

NOTE

the rear bearing cover and gasket; discard

the gasket.

During assembly, tighten the idler shaft

Figure 4-35. Removal of Rear Output Shaft Rear Bearing Cover, Idler Shaft Rear Bearing

Cover, and Input Shaft Rear Bearing Cover.

4-24