Bridge Conversion Set, Fixed Bridge; Bailey Type

TM 746-10

(5) Nuts, cap screws, and tape. Pack in

(4) Lumber and carrying bars. Bundle in

quantities most convenient for handling with 1Y4inch

triplewall fiberboard boxes.

metallic strapping.

(6) Footwalk bearers, ramp pedestals,

(5) Rack bar jacks. Bundle jacks and jack

sway braces, footwalk assemblies, bracing frames,

handles in quantities of two, with metallic strapping

rakers, and end posts. Bundle in quantities most

specified herein.

convenient for handling with 1 Y4-inch metallic

strapping.

(6) Rocking rollers. Do not pack rocking

rollers.

(7) Plain and button ramps and plain and

button stringers. Bundle in quantities of four each.

(7) Other components. Pack bridge erection

Secure bundles with four 1 4-inch metallic straps.

set components other than specified in paragraph 4-91

in triple-wall fiberboard or wood boxes. More than one

(8) Base plates, guardrail ribands, and truss

NSN item may be packed in boxes; however, weight

panels. Require no packing.

limitation of the boxes will not be exceeded.

(9) Manila rope. Pack in triple-wall fiberboard

or wood box.

4-92. Bridge, Floating, Highway, 135 Feet

4-90. Bridge Conversion Set, Fixed Bridge; Bailey

a. Unpainted, unprotected metal surfaces. Coat

Type

unpainted, unprotected metal surfaces of component

items with P-1.

a. Unpainted, unprotected metal surfaces. Coat

b. Handtools. Preserve and pack per paragraph 4-

unpainted, unprotected metal surfaces of component

items with P-1.

c. Cotton duck bags. Unit pack submethod IC-3.

b. Cotton duck bag. Unit pack submethod IC-3.

d. Sockets, shackles, hold-down bolts, adapters

c. Juntion link bearings, bracing bolts, connector

and pontoon assembly pins, wire rope clips, pins, repair

bolts, chord clamps, transom clamps, junction links,

kits, thimbles, bridge connectors, and retainers. Pack in

launching nose links, connector and sway brace pins, tie

fiberboard boxes. Gross weight of each box will not

plates, and bridge pin retainers. Pack in triple-wall

exceed 90 pounds. Reinforce boxes with metallic

fiberboard or wood boxes. More than one NSN item

strapping.

may be packed in boxes; however, weight limitation of

the boxes will not be exceeded.

e. Air gauges and luminous tape.

Unit pack

individually submethod IC-3.

d. Bearing cribs, crib capsills, junction chesses,

and bracing frames. Bundle in quantities of four each

f. Pin and spring holder assembly. Secure pin and

with l14-inch metallic strapping.

spring holder assemblies, which are part of ramps,

stiffeners, etc., in place with bridge pin retainers to

e. Sway braces, junction posts, and rakers.

prevent loss. If subject to damage, remove and pack in

Bundle in quantities most convenient for handling with

fiberboard boxes.

14-inch metallic strapping.

g. Packing.

4-91. Bridge Erection Set, Fixed Bridge; Bailey Type

(1) Holdfast assemblies and steel pickets.

Pack per paragraph 4-89d(1).

a. Unpainted, unprotected metal surfaces. Coat

(2) Handrail posts, retainer assemblies, rope,

unpainted, unprotected metal surfaces of components

chain hoist, cable grip, and wire rope assemblies. Place

parts with P-1.

in chests if space permits or pack in triplewall fiberboard

or wood boxes.

b. Handtools. Preserve and pack per paragraph 4-

(3) Curbs, anchors, outboard motor brackets,

raft brackets, deck units, deck panels and ramps, panel

c. Cotton duck bags. Unit pack submethod IC-3.

assemblies, plate covers, and saddles. Nest and bundle

d. Packing.

in quantities most convenient for handling with 1 4-inch

(1) Holdfast assembly. Pack per paragraph

metallic strapping. The number of bundles and pieces

4-89d(1).

to a bundle should be kept to a minimum to facilitate

(2) Rocking roller templates.

Bundle in

association to the respective end item. If bundling is

quantities of four and secure with 1 4-inch metallic

impracticable, items will require no overpacking.

strapping.

(4) Chain hoists. Pack in chests provided.

(3) Plain templates. Bundle in quantities of

(5) Pontoon floats. Deflate and place repair

12 and secure with 1 4-inch metallic strapping.

parts in the pockets provided. Fold pontoons and

4-24