Installation. - TM-55-1930-208-240248

TM 55-1930-208-24

(8) Press bearing (19) into gear (20). Install gear (20), shaft (28) a d grease fitting (21). Secure shafts (22 and

18) with two bolts (17).

(9) Install washer (16), knob (15), and pin (14). Install key (13) and handwheel (12).

(10) Install shaft (11), strut (10), pedal (9), shoe (8), block (7), pin (6), two cotter pins (5), and setscrew (4).

g. Installation.

(1) Refer to figure 4-4 and attach a sling to drum of winch. Attach a suitable lifting device to sling and raise the

winch. Move lifting device and position the winch over its mounting brackets. Lower the lifting device and

remove the sling.

(2) Install two deck brackets (3) and secure with ten bolts (2) and ten nuts (1).

(3) Lubricate in accordance with paragraph 3-1, TM 55-1930-208-10.

4-15