OIL PRESSURE REGULATOR.

TM 55-1930-208-24

3-46. OIL PRESSURE REGULATOR.

This task covers:

a. Removal

b. Cleaning

c. Inspection

d. Installation

INITIAL SETUP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Materials Required:

Gasket P/N 5104381

Gasket P/N 515376

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Engine removed from mounting frame (paragraph 3-15).

a. Removal. (Refer to figure 3-96).

(1) Remove two screws (1), two washers (2), two screws (3), and two washers (4).

(2) Remove pressure regulator (5).

(3) Remove and discard gasket (6) and gasket (7).

Figure 3-96. Oil Pressure Regulator, Removal/Installation.

3-159