Figure 3-56. Fuel Injector, Disassembly/Reassembly.

TM 55-1930-208-24

3-22. INJECTOR, FUEL - Continued.

c. Disassembly. (Refer to figure 3-56).

(1) Remove cup (1), adapter (2), spacer (3), spring (4), and filter element (5).

(2) Raise spring (4) above stop pin (6) by prying with a screw driver.

(3) Remove stop pin (6). Slowly allow spring (9) to expand.

(4) Remove follower (7), plunger (8), and spring (9).

(5) Remove nut (10), packing (11), spacer (12), and spray tip (13). Discard packing (11).

(6) Remove seats (14 and 15), spring (16), gage (17), and disk (18).

(7) Remove bushing (19), spacer (20), rack (21), and gear (22). Remove pin (23) from body (24) if

damaged.

Figure 3-56. Fuel Injector, Disassembly/Reassembly.

3-88