FIGURE 2-17. Thermostat Alignment.

TM 55-1905-223-24-4

REPLACEMENT

a. Position the thermostat, make sure the rounded "point" on the thermostat aligns with the notch on the housing.

b. Make sure that the "jiggle" pin (1, FIGURE 2-17) is in its notch (2) and the tang (3) is in the slot (4) in the

housing.

FIGURE 2-17. Thermostat Alignment.

"Package" the lifting bracket (6, FIGURE 2-16) and gasket (5) to the thermostat (4) and housing (3). Install

capscrew (2) and bolts (1). Torque to 18 ft-lb (24 N-m).

d. Replace alternator (para. 2-22).

e. Connect the negative (-) battery cable and replace V belt (para. 2-21) on the alternator pulley.

NOTE

For coolant mixture, refer to TB 55-1900-207-24.

Replace coolant.

2-61