|
|
TM 55-1905-223-24-4
2-24.
Replace/Repair Water Inlet Connection Group. (FIGURE 2-18)
This task covers:
a. Removal,
b.
Repair,
c.
Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's
Engine secured and tagged "Out of
rail and marine diesel engines,
Service" (TM 55-1905-223-10).
Battery cable disconnected.
Combination wrench set, metric
Coolant drained.
10mm thru 24mm, 5120-01-046-4976
Right side protective cover removed.
Torque wrench kit P/N 3377216
Materials/Parts
Preformed packing P/N 3906697
Coolant, Item 4, Appendix C
Warning tags, Item 21, Appendix C
REMOVAL
a. Remove drive belt and alternator group (para. 2-21).
b. Locate water inlet connection (2).
c.
Remove three bolts (1). Remove hose clamp off radiator.
d. Remove water inlet connection (2) and preformed packing (3). Discard preformed packing.
REPAIR
Repair of the water inlet connection consists of replacement of preformed packing (3).
REPLACEMENT
a. Position water inlet connection (2) and preformed packing (3) on engine.
b. Install three bolts (1). Torque to 32 ft-lb (43 N m). Install hose clamp on radiator.
c.
Install alternator group (para. 2-21).
d. Install protective cover.
2-62
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |