Figure 1-5. Details of Support Bracket and Gas Spring

TM 9-8140-381-14&P

approximately 1 to 6 inches.

(3) Return protective cover to its original

position.

c. Using two persons, raise cover to open position

and secure safety brackets (two each) in place

(4) Grasp knob on combination lock bolt and

by quick release pins (fig. 1-5).

pull bolt to the left, until lock is open.

d. Install two tang cushions, one on each container

b. Release two latches attached to front of WSC

locking tang.

(fig. 1-1) by pulling handles forward. When

both latches are released, WSC cover may lift

Figure 1-5. Details of Support Bracket and Gas Spring

1-6