 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 components for damaged valve seat
surfaces, damaged threads, and other
damage which might make components
unserviceable. Replace all damaged
parts.
(3) Repair. Damaged flame heater com-
ponent must be replaced.
a. Removal. Figure 140. (A) Disconnect flame
healer ignition lead from flame heater ignition
d. Assembly of Flame Heater Nozzle and
Holder (fig. 13 9). Assemble flame heater nozzle
unit. (B) Disconnect flame heater harness from
and holder bv installing nut (D-7) on holder (D-8).
ignition unit. (C) Remove two 5/16- inch plain
Install filter (D-6), valve (D-5), seat gasket
nuts and 5/16- inch lock washers securing the two
(D-4), and seat (D-3). Install body gasket (D-2)
clamps which secure ignition unit to intake
and body (D- 1).
manifold elbow. (D) Remove ignition unit and
clamps and remove clamps from unit.
e. Assembly of Intake Manifold Flame
Heater. Refer to figure 138 and reverse the se-
b. Istallation. Refer to figure 140 and re-
auence of instructions to assemble intake mani-
verse the sequence of instructions to install
fold flame heater.
the flame heater ignition unit.
f. Installation. Refer to figure 137 and re-
verse the sequence of instructions to install
the intake manifold flame heater assembly.
FLAME HEATER FUEL FILTER
ASSEMBLY.
BLY
a. Removal and Disassembly. Remove and
disassemble flame heater fuel filter assembly
FLAME HEATER IGNITION UNIT.
as follows.
104
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals