Overhaul of Generator Drive

6-12. Overhaul of Generator Drive

a. Disassembly. Disassemble generator drive

gearshaft and adapter following instructions

accompanying figures 6-24 and 6-25.

1. Coat new oil seal with engine oil, Military

Specification MIL-L-45199. Position seal on bore of

bearing cage with lip of seal toward ball bearing seat.

2. Carefully press oil seal into cage until seal is tight

against seal seat flange.

3. Press starter driven gearshaft in the bearing cage.

Figure 6-23. Pressing oil seal into

bearing cage.

Figure

6-24.

Removing

generator

adapter

oil seal.

6-28