Figure 5-104. Removing or installing valve adjusting screw cover plates.

Remove

Install

1. Remove 11 bolts (A) attaching eight injector tube

1. Position two new cover plate gaskets (C) on each of 12

clamp supports to valve adjusting screw cover plates

rocker arm covers.

and remove supports.

2. Position 24 valve adjusting screw cover plates on

2. Remove 37 bolts (B) and flat washers attaching 24

rocker arm covers. Position eight injector tube clamp

valve adjusting screw cover plates to rocker arm covers.

supports on cover plates at locations shown and install

Remove plates.

11 bolts (A) securing supports and plates to covers.

3. Remove and discard 24 cover plate gaskets (C).

3. Install 37 bolts (B) and flat washers in remaining

locations securing cover plates to covers.

Figure 5-104. Removing or installing valve adjusting screw cover plates.

5-62