Figure 5-48. Disconnecting or connecting fuel and oil tubes-rear center shrouds.

Disconnect

1. Disconnect fuel return hose (A) from tube cross.

2. Disconnect fuel injector nozzle fuel return tubes (B)

f r o m tube cross.

3. Remove nut (C) and flat washer attaching tube cross

to right rear center shroud and remove cross.

4 . Disconnect turbosupercharger oil hose (D) from

bulkhead adapter elbow.

S . Remove nut (E) and flat washer attaching adapter

elbow to left rear center shroud and remove elbow.

6. Remove hose clamp (F) and rear crankcase breather

tube tee.

Connect

1. Install hose clamp (F) on rear crankcase breather tube

tee. Install rear crankcase breather tube hose through

right rear center shroud onto breather tube and tighten

clamp.

2. Position bulkhead adapter elbow in left rear center

shroud and install nut (E) and flat washer securing

elbow to shroud.

3. Connect turbosupercharger oil hose (D) to bulkhead

adapter elbow.

4. Position tube cross in right rear center shroud and

install nut (C) and flat washer securing cross to shroud.

5. Connect fuel injector nozzle fuel return tubes (B) to

tube cross.

6. Connect fuel return hose (A) to tube cross.

Figure 5-48. Disconnecting or connecting

fuel and oil tubes-rear center shrouds.

Rem ove

1. Remove three machine screws (A) and lock washers.

2. Remove left and right rear center shrouds (B).

Install

1. Position left and right rear center shrouds (B) on

engine.

2. Install three machine screws (A) and lock washers.

Figure 5-49. Removing or installing exhaust

manifold left and right rear center shrouds.

5-26