Figure 5-47. Removing or installing left front shroud.

Remove

1. Remove three machine screws (A) and remove left

front shroud.

2. Remove eight plate nuts (B) from shroud.

Note. Remove or install cylinder baffle from

c y l i n d e r N o . 1L after left front shroud is

r e m o v e d and in the same manner as cylinder

baffle No. lR was removed (fig. 5-44). Cylinder

baffle for cylinder No. 6R is identical and in-

t e r c h a n g e a b l e with baffle for cylinder No. 1L

a n d is also removed or installed in the same

manner.

Install

1. Install eight plate nuts (B) on left front shroud.

2. Position left front shroud on engine and install three

machine screws (A).

Figure 5-47. Removing or installing left

front shroud.

Remove

1. Remove two machine screws (A).

2. Remove three machine screws (B) and lock washers

attaching top filler plate to crankshaft damper and oil

filter housing. Remove top filler plate.

3. Remove three machine screws (C) and lock washers

attaching side filler plate to housing.

4. Remove three machine screws (D) attaching side filler

plate to left front shroud and remove filler plate.

Install

1. Position side filler plate on left front shroud and install

three machine screws (D) securing plate to shroud.

2. Install three machine screws (C) and lock washers

securing side filler plate to crankshaft damper and oil

filter housing.

3. Position top filler plate on housing. Install three

machine screws (B) and lock washers securing plate to

housing.

4. Install two machine screws (A).

Figure 5-46. Removing or installing top and

side filler plates-cylinder No. 1L.

5-25