PREPARE TRANSMISSION FOR SERVICING

TM 9-2520-270-34

PREPARE TRANSMISSION FOR SERVICING

DESCRIPTION

This task covers the following subtasks:

Page

Subtask

Remove Transmission from Shipping/Storage Container . . . . . . . . . . . . . . . . . . . . . . . 2-144

Install Transmission on Tip-over Stand with Transmission Mounting Plate Kit . . . . . . . 2-149

It includes:

1. Removal of the transmission from the shipping/storage container.

2. Installation of the transmission on the tip-over stand.

3. Removal of protective covers, caps, plugs, and gaskets.

INITIAL

SETUP

Personnel Required:

Tools:

General mechanic's tool kit:

Track Veh Rep 63H10

Helper (H)

automotive -- (Item 33, App C)

Lifting sling (Item 44, App C)

E q u i p m e n t Conditions:

Tip-over stand -- (Item 96, App C)

Torque wrench -- (Item 100, App C)

Transmission installed in Shipping/Storage

Transmission mounting plate kit --

Container. See page 2-153.

(Item 104, App C)

Lifting device with lift capability

NOTE

of at least 3000 Ibs (1361 kg)

Reusable mounting hardware is put in shipping

bag and stored in container. All other reusable

Materials/Parts:

hardware/parts also should be placed in plastic

bag(s) and stored in container for future use.

Plastic bag -- (Item 9, App B)

Wood block (2) (Item 5, App D)

REMOVE TRANSMISSION FROM SHIPPING/STORAGE CONTAINER

1. RELEASE SHIPPING/STORAGE

CONTAINER (1) INTERNAL PRESSURE.

a. Depress and hold pressure equalizing

valve button (2) on access cover (3)

to vent internal pressure of

container (1).

2. REMOVE 20 SELF-LOCKING NUTS (4),

WASHERS (5), SCREWS (6), AND

WASHERS (7), DO NOT DISCARD NUTS.

Change 1

2-144