PREPARE TRANSMISSION FOR SHIPPING OR STORAGE

TM 9-2520-270-34

PREPARE TRANSMISSION FOR SHIPPING OR STORAGE

DESCRIPTION

This task covers the following subtasks:

Page

Subtask

Remove Transmission from Tip-over Stand and Tip-over Stand Fixture . . . . . . . . . 2-153

Install Transmission in Shipping/Storage Container . . . . . . . . . . . . . . . . . . . . 2-159

It includes:

1. Preparation of the transmission for shipping or storage.

2. Removal of the transmission from the tip-over stand.

3. Installation of the transmission in the shipping/storage container.

INITIAL SETUP

Personnel Required:

Tools:

Track Veh Rep 63H10

Funnel (Item 32, App C)

Helper (H)

General mechanic's tool kit: automotive --

(Item 33, App C)

Equipment Conditions:

Lifting sling (Item 44, App C)

Socket wrench attachment (Item 84, App C)

Transmission mounted on tip-over stand. See

Torque wrench (Item 100, App C)

Lifting device with lift capability of at

Shipping/storage container separated into two

least 3000 Ibs (1361 kg)

halves

Upper container half positioned on blocks to

Materials/Parts:

protect mounting flange

Lower container half with container frame in

Dessicant unit (64) (Item 3, App B)

place on resilient container frame and

Masking tape -- (Item 6, App B)

reusable parts removed

Sealant Compound (Item 11, APP B)

Transmission oil (Item 12, App B)

Gasket

PTO cover gasket

Preformed packing

Shipping/storage container

GO TO NEXT PAGE

2-153

Change 3