DIAGNOSTIC TEST PROCEDURE (FAULT ISOLATION) (Continued)

TM 9-6920-737-10

DIAGNOSTIC TEST PROCEDURE (FAULT ISOLATION) (Continued)

Observe that the "COFT VISUAL SYSTEM DIAGNOSTICS MENU" (6) with "OPTION " prompt (7) appears on

the

display.

NOTE

To exit diagnostic testing at this point go to step 24 (see 3-33).

10.

Enter number 1 on keyboard (3).

11.

Observe that 1 appears after "OPTION" prompt (7).

12.

Press RETURN key on keyboard (3).

13.

Observe that the "COFT VISUAL SYSTEM FAULT ISOLATION" display page (8) appears on the display.

14.

Observe that the display, slowly and automatically, steps down through the test with the first test being "SDT

Verification: TA Response (FI360)" displayed (9).

15.

If no faults are identified by the test, the test will end with the message "COFT Visual System Fault Isolation

Complete *** No ERRORS ***" (10) and automatically returns to "COFT VISUAL SYSTEM DIAGNOSTICS MENU".

Then move to step 24 (see 3-33 ).

3-32