Special Information - TM-9-6695-256-34P0006

TM 9-6695-256-34P

h. Quantity Incorporated in Unit. Indicates the

NOTES

quantity of the item used in the breakout shown on the

illustration figure, which is prepared for a functional

Repair parts should not be requisitioned for

group, subfunctional group, or an assembly. A "V"

plug-in boards identified in the plug- in board

appearing in this column in lieu of quantity indicates that

exchange program, except by the depot

no specific quantity is applicable (e.g., shims, spacers,

designated to perform the repair. Repair of

etc).

calibration set components, with plug-in board

assemblies or subassemblies designated as

4. Special Information

program exchange replacements with a

recover- ability code of L, will be accomplished

a. Repair parts for components of standards sets

by replacing the plug-in board.

which can be identified as existing in the supply system

will be requisitioned through normal supply channels

c. The plug-in board exchange program functions

from the appropriate supply commodity manager.

are as follows:

b. Repair parts for components of standards sets

(1) Requisitioning instructions for initial issue

which cannot be identified as to proper supply source will

plug-in boards will be provided since new instrument

be requisitioned from USAMICOM, using routing

boards are included in the program.

identifier B64 and furnishing as a minimum, the following

as exception data.

(2) As a plug-in board covered by the program

fails, a replacement will be requisitioned. Requisitions

(1) Component stock number of the individual

will be submitted to Commander, US Army Missile

end item to be repaired.

Command, B64, Redstone Arsenal, AL 35809.

(2) Component

manufacturer's

equipment

(3) Simultaneously with c(2) above, the

model number and serial number.

defective board being replaced will be shipped by

certified mail, return receipt requested, to the following

(3) The equipment manufacturer's stock

address:

number as listed in the appropriate manual for the

desired repair part.

Transportation Officer

Anniston Army Depot

(4) The repair part reference designation,

M/F Field Service Stock

circuit reference, circuit symbol schematic designation,

Anniston, AL 36201

or reference number as listed in the manufacturer's

manual.

When requisitioning a replacement board, the turn-in

document number of the replaced board shall be cited on

(5) The technical specification of the repair part

the requisition.

as contained in the appropriate manufacturer's manual.

5. How to Locate Repair Parts

(6) The title and date of the manufacturer's

manual from which the information in paragraphs a, b(3),

a. When NSN or reference number is unknown:

(4), and (5) above was taken.

(1)

First.

Using the table of contents,

determine the assembly (functional group) within which

the repair part belongs.