Federal Supply Code for Manufacturer

TM 9-6695-256-34P

H-

Reparable item.

When uneconomically

e. Federal Supply Code for Manufacturer

reparable, condemn and dispose at the

(FSCM). The FSCM is a 5-digit numeric code listed in

general support level.

SB 708-42 which is used to identify the manufacturer,

distributor, or Government agency, etc.

D-

Reparable item. When beyond lower level

repair

capability,

return

depot.

f. Description. Indicates the Federal item name

Condemnation and disposal not authorized

and, if required, a minimum description to identify the

below depot level.

item. The physical security classification of the item is

indicated by the parenthetical entry (insert applicable

L-

Reparable item. Repair, condemnation, and

physical security classification

abbreviation, e.g.,

disposal

not

authorized

below

Phy Sec C1 (C)-Confidential, Phy Sec C1 (S)-Secret,

depot/specialized repair activity level.

Phy Sec C1 (T)-Top Secret). Items that are included

in kits and sets are listed below the name of the kit or

A-

Item requires special handling or condemnation

set with the quantity of each item in the kit or set

procedures because of specific reasons (i.e.,

indicated in the quantity incorporated in unit column.

precious metal content, high dollar value,

When the part to be used differs between serial

critical material or hazardous material). Refer

numbers of the same model, the effective serial

to appropriate manuals/directives for specific

numbers are shown as the last line of the description.

instructions.

In the Special Tools List, the initial basis of issue

c. National Stock Number (NSN). Indicates the

(BOI) appears as the last line in the entry for each

NSN assigned to the item and which will be used for

special tool, special Test, Measurement, and

requisitioning.

Diagnostic Equipment (TMDE), and other special

support equipment. When density of equipments

d. Part Number. Indicates the primary number

supported exceeds density spread indicated in the

used by the manufacturer (individual, company, firm,

BOI, the total authorization is increased accordingly.

corporation, or Government activity), which controls

the design and characteristics of the item by means of

g. Unit of Measure (U/M).

Indicates the

its engineering drawings, specifications, standards,

standard of the basic quantity of the listed item as

and inspection requirements to identify an item or

used in performing the actual maintenance function.

range of items.

This measure is expressed by a two-character

alphabetical abbreviation (e.g., ea, in, pr, etc). When

the unit of measure differs from the unit of issue, the

NOTE

lowest unit of issue that will satisfy the required units

When a stock numbered item is

of measure will be requisitioned.

requisitioned, the item received may have a

different part number than the part being

replaced.