|
|
TM 9-6685-202-14
e. Cistern Base Assembly. Perform the following
12. Screw, battery HIC 10-60-04
steps to disassemble the cistern base assembly for
13. Tube, battery case HIC 10-53-01-A
utilization of authorized replacement parts:
14. Plug, battery case HIC 10-53-02
15. Screw, contact HIC 10-52-03
(1) Remove gland nut (1) from the barometer
16. Nut, hexagon HIC No. 5-40
base and recover tube cup washer (2), hydraulic 0-ring
17. Nut, hexagon HIC No. 5-40
packing (3), and tube cushion 0-ring packing (4).
18. Spring, contact HIC 10-52-04
(2) Unscrew nipple subassembly (5) from
19. Bushing, contact HIC 10-52-03
cistern lid (9), recovering gasket (6).
20. Terminal, wire, solderless (Commercial)
(3) Unscrew shipping plug (7) from cistern lid,
21. Wire, PVC insulated AWG No. 32, 12 in. lg
recovering gasket (8).
(Commercial)
(4) Remove cistern lid (9), cistern gaskets
22. Clamp, cable HIC 1/8 in. wire size
(10), and cistern (11) by removing cistern nut (12) and
23. Screw, steel HIC 4-40 x 1/4
gasket (13) from top of cistern stud (14). Remove
cistern stud from barometer base.
24. Switch, pushbutton HIC 17-B-203
(5) Remove stop screw (15) and mercury
25. Nut, binding 7/16-24-NF
locking screw (16) from barometer base (17).
26. Receptacle assembly HIC 13N12935
KEY to fig. 4-8
A -Receptacle HIC 13N12935A
B -Nut HIC 13N12935B
1.
Cover, level HIC 10-50-00-A
C -Insulator HIC 13N12935C
2.
Screw, machine, binding head HIC 4-40x 1/4
D -Nut, insulator HIC 13NI2935D
3.
Plaster (Commercial)
27. Plate, identification HIC 10-50-23
4.
Level, bubble HIC 10-55-01
28. Screw, machine, socket head HIC 2-56 x 3/16
5.
Screw, leveling HIC 10-50-12-A
29. Platform HIC 10-50-17
6.
Cover, calibration HIC 10-50-21
7.
Chart, calibration HIC 10-50-22
NOTE
8.
Screw, machine, binding head HIC 4-40 x 1/4
The key numbers shown below in
9.
Drawer HIC 10-50-19
parenthesis refer to figure 4-8.
10.
Knob, drawer HIC 10-50-18
11.
Screw, machine, binding head HIC 6-32 x 1/4
4-19
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |