PMCS PROCEDURES - TM-9-6650-235-13-P0023

ARMY

TM 9-6650-235-13&P

MARINE CORPS

TM-08552A-13&P

checks and services. Carefully follow these instructions.

2-4.

PMCS PROCEDURES (CONT).

e. If your equipment does not per- form as

WARNING

required, refer to troubleshooting on page 5-3. Report

any malfunctions or failures on the proper DA Form

Bare electrical wiring could cause

2404, or refer to DA PAM 738-750.

shock upon contact.

f. The equipment is not ready/ available if column

(2) Damaged Wires. The nylon coating on

indicates deficiencies which must be corrected before

the electrical wiring is easily damaged, and may be

you can operate the M3 Borescope.

stripped away, presenting a possible hazardous

condition. Ensure that the electrical wiring, especially on

the illuminating head assembly, is not damaged.

d. The procedure column of your PMCS table tells

you how to do the required

Table 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES

B--Before Operation

D--During Operation

A--After Operation

Interval

ITEM TO BE INSPECTED

Equipment

Item

Is not Ready/Available

No.

PROCEDURE

If:

Check to make sure that all items

Items are missing.

referenced in paragraph 1-9 are in

the M3 Borescope optical case.

EYEPIECE ASSEMBLY

a. Check eyepiece assembly (1)

Eyepiece assembly binds

for ease of operation or

or has missing or broken

broken parts.

parts.

2-4