Special Information - TM-9-6625-1989-34P0006

TM 9-6625-1989-34P

h. Quantity incorporated in Unit. Indicates the quantity

NOTE

of the item used in the breakout shown on the illustration

Repair parts should not be requisitioned for plug-in

figure, which is prepared for a functional group,

boards identified in the plug-in board exchange program,

subfunctional group, or an assembly. A "V" appearing in

except by the depot designated to perform the repair.

this column in lieu of quantity indicates that no specific

Repair of calibration set components, with plug-in board

quantity is applicable (e.g., shims, spacers, etc).

assemblies or subassemblies designated as program

exchange replacements with a recoverability code of L,

will be accomplished by replacing the plug-in board

4. Special Information

c. The plug-in board exchange functions are as

a. Repair parts for components of standards sets

follows:

which can be identified as existing in the supply system

will be requisitioned through normal supply channels

(1) Requisitioning instructions for initial issue

from the appropriate supply commodity manager

plug-in boards will be provided since new instrument

boards are included in the program.

b. Repair parts for components of standards sets

which cannot be identified as to proper supply source will

(2) As a plug-in board covered by the program

be requisitioned from USAMICOM, using routing

fails, a replacement will be requisitioned. Requisitions

identifier B64 and furnishing as a minimum, the following

will be submitted to Commander, US Army Missile

as exception data.

Command, B64, Redstone Arsenal, AL 35809.

(1). Component stock number of the individual

(3) Simultaneously with c(2) above, the defective

end item to be repaired.

board being replaced will be shipped by certified mail

return receipt requested, to the following address:

(2) Component manufacture's equipment model

number and serial number.

Transportation Officer

Anniston Army Depot

(3) The equipment manufacture's stock number

M/F Field Service Stock

as listed in the appropriate manual for the desired repair

Anniston, AL 32601

part.

When requisitioning a replacement board, the turn-in

(4) The repair part reference designation, circuit

document number of the replaced board shall be cited on

reference, circuit symbol schematic designation, or

the requisition.

reference number as listed in the manufactures manual.

5. How to Locate Repair Parts

(5) The technical specification of the repair part

as contained in the appropriate manufacture's manual.

a. When NSN or reference number is unknown:

(6) The title and date of the manufacture's

manual from which the information in paragraphs a, b(3),

(1) First. Using the table of contents, determine

(4), and (5) above were taken.

the assembly (functional group) within which the repair

part belongs.