|
|
TM 9-4931-710-14&P
C-3 EXPLANATION OF COLUMNS (SECTION II) - CONTINUED
(5) Special Information
a.
USABLE ON CODE - The usable on code appears in the lower left corner of the Description column heading.
Usable on codes are shown as "UOC: . . . . " in the Description column (justified left) on the first line after the
applicable item description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on
codes used in the RPSTL are:
CODE
USED ON
BF4
M140A1 With Case
BF5
M140 Without Case
BF6
M140A1 Without Case
BF7
M139A1 Without Case
BN2
M154 Without Case
U09
M140 With Case
U11
M139 Without Case
b.
FABRICATION INSTRUCTIONS - N/A
c.
ASSEMBLY INSTRUCTION - Detailed assembly instructions for items source coded to be assembled from
component spare /repair parts a refound in Chapter 2, Section III. Items that make up the assembly are listed
immediately following the assembly item entry or reference is made to an applicable figure.
d.
KITS - N/A
e.
INDEX NUMBERS -This index number is a cross-reference between the National Stock Number/Part Number
Index and the bulk material list in Section II.
f.
ASSOCIATED PUBLICATIONS - N/A
g.
ILLUSTRATIONS - LISTING - N/A
(6) How to Locate Repair Parts
a.
When National Stock Number or Part Number is Not Known:
1. First - Using the table of contents, determine the assembly group or subassembly group to which the item
belongs, This is necessary since figures are prepared for assembly groups and subassembly groups, and
listings are divided into the same groups.
2. Second- Find the figure covering the assembly group or subassembly group to which the item belongs.
3.
Third - Identify the item on the figure and note the item number.
4. Fourth - Refer to the Repair Parts List for the figure to find the part number for the item number noted on the
figure.
5. Fifth - Refer to the Part Number Index to find the NSN, if assigned.
Change 3
C-8(C-9 blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |