Section V. PREEMBARK ATION INSPECTION PROCEDURES

TM 9-4931-710-14&P

Section V.

PREEMBARK ATION INSPECTION

PROCEDURES

5-9 GENERAL

The alinement device must be in-

The alinement device must approach new

spected for outward appearance,

equipment standards of operation and

mechanical condition, and proper

appearance. The workmanship and

operation.

quality must reflect the highest standards

obtainable.

5-10 SPECIFIC INSTRUCTIONS

The alinement device must conform to the following specifications for oversea shipment:

a. The lenses and reticle must be free from scratches, pits, and chips, that will affect optical

performance.

b. The dovetail lever must operate smoothly.

c. The reticle must be visible and readable at a distance of approximately 18 in. (45.7 cm), when

placed in a dark area.

d. General appearance and condition of alinement device.

(1)

All parts must be present and free from defects.

(2)

Optics shall be free of internal dirt and moisture. Presence of such contamination shall

render alinement device rejected.

(3)

All plates and decals shall be present and legible.

Alinement devices failing to meet requirements of the above inspections is unsatisfactory for

oversea shipment.