 |
|||
|
|
|||
|
Page Title:
INSTALL CENTER HOUSING, HEAT SHIELD, AND COMPRESSOR HOUSING-continued |
|
||
| ||||||||||
|
|
 TM 9-2990-206-34&P
ASSEMBLY-Continued.
INSTALL CENTER HOUSING, HEAT SHIELD, AND
COMPRESSOR HOUSING - CONTINUED
3. Aline alinement marks scribed during
disassembly and install heat shield
(c)o
NOTE
If the turbosupercharger is
to be used on engine models
AVDS-1790-2DR the heat
shield is not used.
4. Apply a light coat of corrosion inhib-
iting, heat cured, solid film lubri-
cant (MIL-L-4601O) on bolts. Secure
center housing (B) and heat shield
(C) to turbine housing (A) with eight
lockwashers and bolts. Torque
bolts to 275 pound-inches (31 N.m)
using 9/16 inch socket and torque
wrench.
5. Place clamp (0) over backplate (E)
and on heat shield (F).
6. Install "O" ring (G) on backplate
(E).
3-24 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
