Install new preformed packing - TM-9-2990-205-34-P0074

TM 9- 2990- 205- 34&P

ASSEMBLY AND OPERATIONAL TESTING - CONTINUED

0012 00

Install new preformed packing (13) on bearing housing.

Install clamp (14) and slide it down on bearing housing.

Install compressor cover (15). Align marks (16) scribed in housing flanges during disassembly. If your turbo is

a new/newer model, alignment marks will be cast into the flanges of the compressor cover and housing, and

the marks you noted during disassembly should be matched.

NOTE

If you cannot locate the alignment marks, or if you are otherwise unsure of the indexing of the

housings for your turbo, consult Table 3--1.

m. Place clamp (17) over compressor cover and bearing housing flanges, and install clamp nut (18).

n. Torque clamp nut to 110 to 130 lb--in (12.43 to 14.69 NSm).

03i499m

0012 00- 12