CLEANING THE TURBO BEFORE DISASSEMBLY

TM 9- 2990- 205- 34&P

CLEANING THE TURBO BEFORE DISASSEMBLY

0007 00

THIS WORK PACKAGE COVERS:

Cleaning

INITIAL SETUP:

Materials/Parts

Equipment Condition

Hard bristle brush (item 5, WP 0016 00)

Turbo on workbench

Plastic scraper (item 8, WP 0016 00)

Goggles (item 6, WP 0016 00)

Rubber gloves (item 7, WP 0016 00)

Solvent (item 3, WP 0016 00)

Rag, wiping, cotton (item 1, WP 0016 00)

NOTE

Before beginning the disassembly of the turbo, thoroughly clean and degrease exterior sur-

faces using the procedure outlined below.

CLEANING

1. Drain bearing housing of lubricant from oil drain tube (2).

2. Tape oil inlet port (1), oil drain tube opening (2), and threaded hose adapters (3).

03i454m

0007 00- 1