Part Number.

TM 9-2920-257-30&P

- Reparable item.

When beyond lower level repair capability,

return to depot.

C o n d e m n a t i o n and disposal not authorized

below depot level.

- Reparable item. Repair, condemnation, and disposal not

authorized below depot/specialized repair activity level.

- Item requires special handling or condemnation procedures

because of specific reasons (i.e., precious metal content, high

value, critical

m a t e r i a l , or hazardous material).

dollar

Refer

appropriate

manuals/directives

for

specific

instructions.

Federal Supply Code

for

Manufacturer

(FSCM).

The

FSCM

5-digit

n u m e r i c code listed in SB 708-42 which is used to identify the

manufacturer, distributor, or Government agency, etc.

Part Number.

I n d i c a t e s the primary number used by the manufacturer

(individual, company, firm, corporation, or Government activity), to

identify an item or range of items.

T h i s part number controls the design

a n d characteristics of the item or range of items by means of its

engineering drawings, specifications standards, and inspection

requirements.

NOTE

W h e n a stock numbered item is requisitioned, the item received

may have a different part number than the part being replaced.

Description.

I n d i c a t e s the Federal item name and, if required, a

minimum description to identify the item.

Items that are included in

k i t s and sets are listed below the name of the kit or set with the

quantity of each item in the kit or set indicated in the quantity

incorporated in unit column.

W h e n the part to be used differs between

s e r i a l numbers of the same model, the effective serial numbers are shown

as the last line of the description.

Quantity Incorporated in Unit.

Indicates the quantity of the item

u s e d in the breakout shown on the illustration figure, which is prepared

for a functional group, subfunctional group, or an assembly. A "V"

appearing in this column in lieu of a quantity indicates that no specific

quantity is applicable (e.g., shims, spacers, etc.).

C-6