INSTALLATION OF ADAPTER PLATE.

TM 9-2920-252-34&P

3-11. LEAK TEST OF GENERATOR (CONT)

2. INSTALLATION OF ADAPTER PLATE.

NOTE

Adapter plate will usually be mounted

to engine (for generator installation) or

to packaging disk (for storage).

a Install new gasket(1)into groove in inner face of

adapter plate (2).

b. Loosen coupling clamp (3) as necessary and slide

into generator housing (4).

c. Position end of generator housing (4) against

adapter plate (2) and move coupling clamp (3)

into position. Tighten clamp by turning nut (5) to

torque stamped on the outer band of the clamp.

TA315019

3-21/(3-22 blank)