CONNECTOR J2. - TM-9-2920-252-34-P0032

TM 9-2920-252-34&P

3-10. ASSEMBLY (CONT)

2. CONNECTOR J2.

a. Thread two exciter field wires (1) of generator

main assembly (2) through new gasket (3),

connector adapter (4), and second new gasket

(5).

b. Solder wires (1) at respective terminals A (6) and

C (7) [no connection to B].

c. Apply RTV sealer to screw threads. Position

gaskets (3) and (5), adapter (4), and connector (8)

against generator housing (2).

Install four

washers (9) and screws (10). Torque to 3.5-4.5

lb-in [0.4 to 0.5 N ].

d. Using a test set, perform dielectric check by

applying 250 VAC for one minute between the

connector terminals and generator housing.

There shall be no insulation breakdown.

TA315014

3-15