 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2920-252-34&P
3-7. DISASSEMBLY (CONT)
4. CONNECTOR J2.
a. Remove four screws (1) and washers (2).
b. Pull connector (3) away from exciter stator (4).
c. If pins (5) are damaged, unsolder each wire at
connector (3). Remove connector. If there is no
damage to the pins, push pins out of connector
using a small punch.
d. Remove and discard connector gasket (6).
e. Remove connector retainer (7).
f. Remove and discard adapter gasket (8).
g. Inspect connector for damaged threads.
h. Check for damaged contacts and inserts.
TA315011
3-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals