Figure 11. Removing or installing brushes using improvised brush spring lifter.

A - Remove eight bolts and lock washers.

B - Remove pinion housing and associated

parts from the frame.

c - Remove and discard pinion

housing

gasket.

Figure 12. Removing or installing pinion

housing and associated parts.

A - Lift up on brush spring using impro-

vised brush spring lifter (fig. 3).

B - Remove brush from holder.

c - Remove remaining seven brushes in the

same manner.

Figure 11. Removing or installing brushes

using improvised brush spring lifter.

A - Remove two fiber washers.

B - Remove thrust washer.

e. Refer to figures 13 through 17 for

Figure 13. Removing or installing

instructions covering disassembly of the

pinion housing.

washers from armature.