Install flat washer

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

ASSEMBLY OF THE STARTER - CONTINUED

0010 00

Install flat washer (11) in bellows (12).

g. Install bellows (12) with washer on plunger shaft (13).

h. Install recessed washer (14) and spring (15) over bellows (12).

Compress spring (15) and install recessed washer (16). Using retaining ring pliers install retaining ring (6) at

groove in plunger shaft (13).

Put assembled plunger (17) into lever housing assembly (5) with end through coupling hole of the lever.

Install self--locking nut (18), but do not bottom on plunger threads. Position of nut will be adjusted later for

pinion clearance.

Apply a light coat of grease to gasket (19) and preformed packing (20). Install inspection plug (21) and new

gasket (19). Do not tighten plug at this time.

m. Install new preformed packing (20) in groove at mounting face (22) of the housing (5).

n. Apply a light coat of sealing compound to mounting face of lever housing (5).

0010 00- 10