Radio Interference Filter.

TM 9- 2920- 224- 34&P

ASSEMBLY OF THE GENERATOR - CONTINUED

0010 00

2. Radio Interference Filter.

a. Apply RTV sealer to mounting flange of capacitor assembly (1). Tilt capacitor assembly (1) as necessary to

clear installed ground lead and move into position in junction box (2).

b. Install two washer screws (3) into corners of capacitor assembly (1) mounting flange which are closest to

curved side of junction box (2). Torque to 18--24 Ib--in (2.0 to 2.7 NSm).

Apply RTV sealer to mounting flange of capacitor (4). Install capacitor (4) in junction box (2) and secure with

two washer screws (3) at corners of capacitor mounting flange which are closest to curved side of junction

box (2). Torque to 18--24 Ib--in (2.0 to 2.7 Nm).

d. Place generator ground lead (5) in position in junction box (2) and secure it with flat washer (6), new

lockwasher (7), and hexagon plain nut (8).

e. Torque nut (8) to 5--10 Ib--ft (6.8 to 13.6 Nm) while holding ground lead (5) to keep it from rotating out of

correct position. Install flat washer (9) and new hexagon self--locking nut (10) finger tight.

0010 00- 4