Basic Generator Assembly.

TM 9- 2920- 224- 34&P

DISASSEMBLY OF THE GENERATOR ASSEMBLY - CONTINUED

0008 00

5. Basic Generator Assembly.

NOTE

Inspect all bolts, screws, nuts, and plugs for worn or

damaged threads. Replace if defective.

a. Hold inner sleeve nut (1) with wrench while removing outer hex nut (2). Using spline adapter hold generator

drive shaft (3) while removing sleeve nut (1).

b. Remove recessed washer (4) from end of generator drive shaft (3).

Using a plastic mallet, tap the threaded end of generator drive shaft (3) to unseat tapered splines. Remove

generator drive shaft (3) from main body of generator (5).

d. Remove spacer (6), shouldered and recessed washer (7) from end of armature shaft (8).

0008 00- 5