DISASSEMBLY OF THE GENERATOR ASSEMBLY

TM 9- 2920- 224- 34&P

DISASSEMBLY OF THE GENERATOR ASSEMBLY

0008 00

THIS WORK PACKAGE COVERS:

Disassembly

INITIAL SETUP:

Tools and Special Tools

Tools and Special Tools - Continued

General mechanic's tool kit (item 1, WP 0017 00)

Telescope gage set (item 11, WP 0017 00)

Brush spring lifter (item 2, WP 0017 00)

Dial indicator (item 12, WP 0017 00)

Metal scriber (item 3, WP 0017 00)

Hacksaw blade (item 13, WP 0017 00)

Retaining ring pliers (item 4, WP 0017 00)

Puller, mechanical (item 14, WP 0017 00)

Holder, inserted hammer face (item 5, WP 0017 00)

Materials/Parts

Face, hammer, inserted (item 6, WP 0017 00)

Pipe stock, tubular (item 9, WP 0016 00)

Face, hammer, inserted (item 7, WP 0017 00)

Equipment Conditions

Iron, soldering (item 8, WP 0017 00)

Generator on workbench

Adapter, spline (item 9, WP 0017 00)

Caliper set, micrometer, outside (item 10,

Disassembly

NOTE

Before performing disassembly of the generator, read

WP 0007 00, GENERAL CLEANING.

1. Brush Cover Band.

a. Scribe a mark (1) to provide for reassembly alignment of brush cover (2), generator housing (3), support

assembly (4), and fan cover/fan housing/air duct (5). Cut and peel sealant. Sealant is not used on generator

8717421.

b. Loosen clamp screw (6) on brush cover (2) disengage clamp and remove cover.

Remove and discard gasket (7) from under brush cover (2) to expose brush access openings in generator

housing (3).

0008 00- 1