Figure 3-20. Removing oil filter or oil duct sealing screw assembly (code F and G pumps).

TM 9-2910-226-34

remove and discard washer (E). Remove pin (G),

remove and discard packing (F).

Figure 3-20. Removing oil filter or oil duct sealing screw assembly

(code F and G pumps).

b. Refer to figure 3-21. Install pump holding

fixture on pump body and position fixture in a vise.

Remove four hydraulic head plain nuts (A), four stud

sleeves (B) and hydraulic head assembly (C) from

housing.

Figure 3-21. Removing hydraulic head assembly using pump

holding fixture4910-870-2128.

3-8