|
|
TM 9-2835-255-34
ILLUSTRATED LIST OF MANUFACTURED ITEMS (Continued)
MATERIAL
STOCK
DESCRIPTION
FABRICATING REQUIREMENTS
Electrical clip, 50
1. Cut four 36-inch (91.44 cm) pieces of
amp (81348)
wire (1) and one 6-inch (15.24 cm)
WC-440B, Type PC4
piece of wire (2). Strip l/2-inch (1.27
(6 required)
cm) insulation from both ends of four
wires (1, 2).
Switch (96906)
2. Crimp four terminal lugs (3) on one
MS35059-22
end of wires (l).
Terminal lug (96906)
3. Crimp six clips (4) on remaining ends
MS20659-106
of wires (1, 2).
(4 required)
Wire, 12-gauge
4. Install four screws (5), lockwashers (6),
and lugs (3) to switch (7).
(81349) M81044/12-12-
9 (12 feet 6-inches re-
quired)
Figure 5. Test Setup
C-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |