APPENDIX C. ILLUSTRATED LIST OF MANUFACTURED ITEMS

TM 9-2835-255-34

APPENDIX C

I L L U S T R A T E D LIST OF MANUFACTURED ITEMS

This appendix contains complete instructions for making items authorized to be manufactured or

fabricated at intermediate direct support and intermediate general support maintenance. All bulk

materials needed for manufacture of an item are listed by part number or specification number in a

tabular list on the illustration. All dimensions are in inches.

MATERIAL

STOCK

DESCRIPTION

FABRICATING REQUIREMENTS

Electrical clip, 50

1. Cut four 36-inch (91.44 cm) pieces of

amp (81348) WC-

wire (1, 2). Strip l/2-inch (1.27 cm) in-

440B, Type PC4

sulation from both ends of four

(6 required)

wires (1, 2).

Switch (96906)

2. Crimp two terminal lugs (3) on one

MS35059-22

end of two wires (1).

Terminal lug (96906)

3. Crimp six clips (4) on remaining ends

MS20659-106

of four wires (1, 2).

(2 required)

Wire, 12-gauge

4. Install two screws (5), lockwashers (6),

(81349) M81044/12-12-

and lugs (3) to switch (7).

9 (12 feet 6-inches re-

quired)

Figure 1. Test Setup

C-1