NO. 3 SPUR GEARSHAFT AND BEARINGS REPLACEMENT

TM9-2835-255-34

ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 18 of 40)

NO. 3 SPUR GEARSHAFT AND BEARINGS REPLACEMENT

1. REMOVE PLAIN ROUND NUT (1), LOCKING

CUP (2) AND STRAIGHT PIN (3) FROM SPUR GEAR-

SHAFT ASSEMBLY (4).

Secure anti-torque plate (5) to clean work

surface. Position spur gearshaft assembly (4)

so that straight pin (3) is at top. Place spur

gearshaft assembly (4) onto splined shaft (6)

of anti-torque plate (5).

Using suitable tool, uncrimp locking cup (2).

Using spanner wrench (7) and bar, remove

plain round nut (1). Inspect threads of plain

round nut (1). If threads are stripped, replace

plain round nut (1). Remove and discard

locking cup (2).

Using punch and hammer, tap out straight

pin (3). Discard straight pin (3).

Go on to Sheet 19

7-63

Change 6