AGB GEARS AND BEARINGS REPLACEMENT

TM9-2835-255-34

ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 15 of 40)

AGB GEARS AND BEARINGS REPLACEMENT:

1. REMOVE BEARINGS (1) FROM ANY GEAR-

SHAFT (2).

NOTE

The following steps apply to the removal

of both bearings (1) from any gearshaft

(2). No. 5 and 6 gearshaft (2) is shown.

Unscrew and take out handle (3) and body

half (4) from puller (5).

Position puller (5) on bearing (1) and turn

handle (6) clockwise until pusher (7) is snug

against gearshaft (2). Put on body half (4)

and screw in handle (3).

Go on to Sheet 16

7-60

Change 6