INSPECT SLEEVE BUSHING

TM 9-2835-255-34

ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 3 of 40)

1. INSPECT SLEEVE BUSHING (1). IF 45 DEGREE

BEVEL (2) EXISTS, REASSEMBLE USING OLD

PARTS AND REPLACE ACCESSORY GEARBOX

(PAGE 7-21). IF NO 45 DEGREE BEVEL EXISTS,

GO TO STEP 2.

2. REMOVE THREE SCREWS (3), PREFORMED

PACKING (4) AND COVER (5) FROM GEARBOX

FLANGE (6).

3. REMOVE SCREWS (7, 8), WASHERS (9, 10),

BRACKET (11) AND NUTS (12, 13).

Remove screw (7), two washers (9), bracket

(11) and nut (12).

Remove 32 screws (8), 64 washers (10) and

32 nuts (13).

Go on to Sheet 4

7-48

Change 6