ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 1 of 40)

TM 9-2835-255-34

ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 1 of 40)

TOOLS:

General mechanic's tool kit, automotive (SC5180-90-N28)

Anti-torque plate (Item 193, Appendix D)

Arbor press (Item 37, Appendix D)

Bar, 1/2-inch square drive (Item 194, Appendix D)

Caliper, outside micrometer, 0-2-inch (0-25.4 mm) (Item 195, Appendix D)

Combination wrench, 1-1/8-inch (Item 94, Appendix D)

Combination wrench, 7/16-inch (item 133, Appendix D)

Dead- blow hammer (Item 132, Appendix D)

Deep style socket, 1/2-inch drive, 3/4-inch (Item 43, Appendix D)

Drill, twist No. 57 (0.043 inch diameter) (Item 197, Appendix D)

Drill, 7/64-inch (ltem 125, Appendix D)

Extension, 3/8-inch drive, 6-inch (Item 8, Appendix D)

Faceshield (Item 88, Appendix D)

Gear train handle (Item 42, Appendix D)

Industrial goggles (ltem 58, Appendix D)

Inserted hammer face (Item 130, Appendix D)

Inserted hammer face (ltem 131, Appendix D)

Magnifying glass, 4 power (Item 199, Appendix D)

Measure bar (Item 141, Appendix D)

Metal pail, 5 gallon (Item 136, Appendix D)

Micrometer (Item 128, Appendix D)

Micrometer, depth gage (Item 205, Appendix D)

Paint brush, oval (Item 129, Appendix D)

Protective gloves (Item 87, Appendix D)

Puller (Item 200, Appendix D)

Puller, bearing, gearshaft (Item 201, Appendix D)

Punch, drive pin (Item 102, Appendix D)

Ratchet handle, 3/8-inch drive (Item 9, Appendix D)

Sharpening stone (Item 202, Appendix D)

Sleeve set (Item 162, Appendix D)

Sling, accessory gearbox cover lifting (Item 126, Appendix D)

Socket, 3/8-inch drive, 7/16-inch (Item 28, Appendix D)

Spanner wrench (ltem 203, Appendix D)

Tap, 1/2-20NF (Item 135, Appendix D)

Torque wrench, 0-150 ft-lb (Item 24, Appendix D)

Torque wrench, 0-200 in-lb (Item 134, Appendix D)

Torque wrench, 0-600 in-lb (Item 17, Appendix D)

SUPPLIES:

Dry cleaning solvent (Item 7, Appendix B)

Flared conical seal (Item 59, Appendix E) (2 required)

Gasket (Item 121, Appendix E)

Grease (Item 10, Appendix 8)

Go on to Sheet 2

7-46

Change 6