INSTALL AGB MODULE LIFTING SLING

TM9-2835-255-34

GEARBOX MODULE REMOVAL FROM AND INSTALLATION ON ENGINE

(Sheet 4 of 12)

UNHOOK SPRING (1) FROM BRACKET (2).

CUT SAFETY WIRE FROM TWO BOLTS

(3) AND REMOVE BOLTS (3).

REMOVE LOCKPIN (4) FROM FLANGE (5)

OR BUSHING (6) ON INSIDE FLANGE (7)

FROM BOTH SIDES OF ENGINE (8).

REMOVE ONE DOWEL PIN (9) FROM

BOTH SIDES OF ENGINE (8). USE

PULLER (10).

CAUTION

Once pins (9) are removed, module (11) will be loose.

Lower module (11) slowly to make sure splines and

shafts are not damaged.

8. LOWER MODULE (11) BELOW

SHAFTS (12, 13).

Go on to Sheet 5

7-9