 |
|||
|
|
|||
|
Page Title:
REMOVE OIL SCAVENGE TUBE ASSEMBLY |
|
||
| ||||||||||
|
|
 TM 9-2835-255-34
GAS TURBINE POWER UNIT REPLACEMENT (Sheet 5 of 30)
6. REMOVE OIL SCAVENGE TUBE ASSEMBLY (1),
METAL SEAL RING (2) AND GASKETS (3, 4).
a.
Remove screw (5) and self-locking nut (6)
from two clamps (7) and mounting bracket (8).
Discard self-locking nut (6).
NOTE
Mounting bracket (8) does not have to be
removed from rear module forward header
bolt flange (9).
b.
Cut safety wire and remove three outer bolts
(10) and washers (11).
c.
Cut safety wire from two inner bolts (12). Us-
ing box end of torque adapter (13), remove
two bolts (12) and tube assembly (1). Discard
bolts (12).
d.
Remove and discard metal seal ring (2) and
gaskets (3, 4).
NOTE
Replace hollow pins (14) only if damaged,
and set tube assembly (1) aside.
7. INSPECT PINS (14) FOR CRACKS, DEFORMA-
TION AND SCORING. REPLACE AS REQUIRED.
8. INSPECT ALL PARTS FOR DAMAGE. REPLACE
AS REQUIRED.
Go on to Sheet 6
6-66
Change 6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals