 |
|||
|
|
|||
|
Page Title:
INSTALL NO. 10 BEARING RETAINING PLATE, SEAL, AND FACE PLATE |
|
||
| ||||||||||
|
|
 TM 9-2835-255-34
NO. 10 BEARING REPLACEMENT (Sheet 11 of 11)
b.
Turn sungear (10) by hand to engage ring
gear (1) onto planetary gears (9).
c.
Firmly grasp bearing housing, bearing and
spur gearshaft (1) with both hands. Lift and
6
position against reduction gearbox housing
(2) so that alignment marks (3) made during
removal, line up. Three pins (4) on reduction
gearbox housing (2) should align with three
holes (5) in bearing housing flange (6).
d.
Apply antiseize compound to threads of 24
bolts (7). Install 24 bolts (7) and new lock-
washers (8). Tighten bolts (7) between
100-110 Ib-in (11-12 N.m) torque in a
criss-cross sequence. Retorque as required
to retain torque.
11. INSTALL NO. 10 BEARING RETAINING PLATE,
SEAL, AND FACE PLATE (PAGE 6-32.2).
12. INSTALL REDUCTION GEARBOX SPEEDOME-
TER CONNECTORS AND ADAPTERS (PAGE 6-3).
13. CONNECT ENGINE TO TRANSMISSION
TM34-1).
3 PLACES
LE55114
End of Task
6-62
Change 6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals