CLEAN EXCESS SEALANT

TM 9-2835-255-34

NO. 10 BEARING SEAL REPLACEMENT (Sheet 3 of 6)

WARNING

Use caution when using press. Improper tools or

tools not properly alined may cause injury to per-

sonnel or damage to parts or equipment.

WARNING:

CLEAN EXCESS SEALANT (l) FROM

SEAL (2). AND PRESS SEAL (2) FROM.

PLATE (3). USE REMOVAL AND IN-

STALLATION TOOL (4).

Clean excess sealant (1) from seal (2) and

plate (3). Use solvent and rag.

b. Position plate (3) on press. Position re-

moval and installation tool (4), with lip (5)

up, on plate (3). Press seal (2) from plate

(3).

INSPECT PARTS FOR DAMAGE. RE-

PLACE AS REQUIRED.

Go on to Sheet 4

Change 4 6-32.1