INSTALL FORWARD MODULE

TM 9-2835-255-34

FORWARD ENGINE MODULE REPLACEMENT (Sheet 9 of 10)

8. INSTALL FORWARD MODULE (1) ON

REAR MODULE (2).

a. Turn handle (3) clockwise until forward

module (1) is close to shaft (4).

b. Aline forward module (1) with shaft (4).

c. Turn handle (3) clockwise until forward

module (1) is close to rear module (2).

Aline pin (5) in forward module (1) with

small hole (6) in rear module (2).

d. Turn handle (3) clockwise until

modules (1, 2) are mated.

NOTE

Tighten bolts (7) and nuts (8) at the top, bottom, and

each side of engine first to seat modules (1, 2).

e. Apply antiseize compound to 81 bolts (7).

Install bolts (7) and new nuts (8).

f. Apply antiseize compound to 15 studs (9).

Install 15 new nuts (10) on studs (9).

9. TORQUE BOLTS (7) AND NUTS (8, 10)

BETWEEN 170-190 LB-IN (19-22 NZm)

10. HOOK TWO LATCHES (11).

NOTE

If forward module (1) was removed for access only,

go to step 13.

11. INSTALL NEW GASKET (12) AND VALVE

AND ADAPTER (13).

Apply antiseize compound to three bolts

(14). Install gasket (12) and valve and

adapter (13) in forward module (1). Install

bolts (14).

Go on to Sheet 10

5-21