 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
FORWARD ENGINE MODULE REPLACEMENT (Sheet 7 of 10)
REPLACE SHIM (1) AND TORQUE FOUR
2.
BOLTS (2) BETWEEN 250-325 LB-IN
(27-35 NZm).
a. Move link (3) forward. Remove bolts (2),
eye bracket (4), and shim (l).
b. Apply antiseize compound to bolts (2).
Install new shim (1) and bracket (4) on
front module (5) with bolts (2). Torque
bolts (2) between 250-325 lb-in
(27-35 NZm).
c. Aline hole in link (3) with hole in
bracket (4). If holes do not aline, repeat
steps a, b, and c, peeling off shim (1)
until holes aline.
d. Install pin (6) and lockpin (7).
REPLACE SEAL RINGS AND EXPANDER
3.
SPRINGS (PAGE 6-33).
INSTALL NEW GASKET (8).
4.
Apply shortening to gasket (8) and install
gasket (8) in groove (9) on module (10).
NOTE
If module (5) was removed for access only, do step 5.
Go on to Sheet 8
5-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals